X

We are available for you!

 

HEADQUARTERS AUSTRIA

WFL Millturn Technologies GmbH & Co. KG
Wahringerstraße 36
4030 Linz
Austria

phone: +43 732 6913 - 0
office(at)wfl.at
CONTACT FORM


Service-Hotline:
phone: +43 732 6913 - 5000

TRAINING

Exclusive Know How for our customers

Our training offer covers everything your programmers, machine operators and service technicians will need.

 

 

Continuous training will guarantee maximum productivity for your company, motivate your staff and help react to new machining tasks. We have designed a variety of training courses to share our expertise with you, either directly at WFL or upon request also at your plant

 

  • Training for motivated and well-educated employees
  • Training contents tailored to your machine configuration
  • Training directly on the MILLTURN
  • Customised client training also possible (for customer-specific, production technical challenges)
  • Practice-oriented technical knowledge
  • Experienced, in-house trainers
  • Exploit the full potential of your machine
  • Minimise operating errors
  • Increase productivity

CNC programmer training is offered in three stages, depending on the level of prior knowledge of the participants.

 

 

Participants

Short description

Learning objectives

Duration

Basic training for Siemens Sinumerik 840D sl

This course is designed for NC programmers and technical personnel with extensive programming knowledge (basics of CNC technology).

Manual creation of NC programmes, based on WFL standard cycles, tool management and WFL machining cycles. It deals with the basics of options and special cycles according to the agreement (measurements, eccentric tappet machining, etc.).

After the course, participants will be able to generate NC programmes of a low to medium application requirement for the MILLTURN.

5 working days in the manufacturing plant, WFL Linz
Mon – Thurs, 08:00 – 17:00
Fri, 08:00 – 12:00
(36 hours)

 

Further training for Siemens Sinumerik 840D sl

This course is intended for those who have passed the programmer training "Basic training for Siemens Sinumerik 840D sl".

Manual creation of NC programmes, based on WFL standard cycles, tool management and special cycles (measurements, CrashGuard, cam milling, etc.). The contents of the course are determined according to the participants' specific requirements.

After the course, participants will be able to use MILLTURN applications more efficiently.

4 working days in the manufacturing plant, WFL Linz
Mon – Thurs, 08:00 – 17:00
(32 hours)

Further course in CrashGuard Studio

This course is intended for those who have passed the programmer training "Basic training for Siemens Sinumerik 840D sl".

Manual creation of NC programmes, based on WFL standard cycles, tool management and WFL machining cycles (measurements, CrashGuard, cam milling, etc.). The contents of the course are determined according to the customer's specific requirements.

After the course, participants will be able to use MILLTURN applications more efficiently and verify NC programmes on the PC in advance using CrashGuard Studio.

5 working days in the manufacturing plant, WFL Linz
Mon – Thurs, 08:00 – 17:00
Fri, 08:00 – 12:00
(36 hours)

Participants

Short description

Learning objectives

Duration

This course is designed for operators and fitters, as well as specialists with good knowledge of machining and experience with CNC machines.

Introduction to handling and operating customer machines:

  • Basic machine settings
  • Input/output of a programme
  • Upgrading and correcting tools
  • Operating modes
  • Errors and their rectification
  • Using CrashGuard (optional)
 

After the course, participants will be able to upgrade the MILLTURN, work through programmes and optimise and set up the tools for the next workpieces during primary processing time.

5 working days at the customer's plant
Mon – Thurs, 08:00 – 17:00
Fri, 08:00 – 12:00
(36 hours)

 

 

Participants

Short description

Learning objectives

Duration

Mechanic service training

This course is intended for service personnel and specialists with good knowledge of hydraulics and pneumatics, as well as the maintenance of tool machinery.

 

 

 
  • Explanation of the energy supply
  • Different assemblies of the machine (headstock, main drive, compound slides, tailstock, turning-boring-milling unit, tool changer, tool magazine, etc.)
  • Dealing with the machine controls
  • Configuration of the machine geometry after a collision
  • Maintenance instructions
  • Use of the documentation CD provided (construction)
 

After the course, participants will be able to independently perform preventative maintenance and upkeep work as well as error diagnostics and troubleshooting.

2 working days in the manufacturing plant, WFL Linz, to be arranged individually

Electrician service training

This course is intended for service personnel and specialists with basic knowledge of IT, regulation technology and good knowledge of tool machinery.

 
  • Practical instruction in the use of the client's machine (or a comparable machine), control unit, modules, drives
  • Function of the various assemblies: circuit diagrams, machine data, PLC status
  • Dealing with the machine controls
  • Practical configuration of the machine geometry following a collision, step-by-step process walkthrough
  • Use of the service CDs provided
 

After the course, participants will be able to independently perform preventative maintenance and upkeep work as well as error diagnostics and troubleshooting.

2 working days in the manufacturing plant, WFL Linz, to be arranged individually

Back to top