M20 MILLTURN
The powerful and smart solution
The die is cast. Not only in terms of new design, but also technical diversity. The MILLTURN turning-boring-milling center has been developed significantly over the last few years and brings great innovations with it. In the field of machine tools, the M20 proves to be extremely dynamic, powerful and, above all, smart. Full power and energy flow through the veins of the M20. The machine is suitable for machining workpieces up to Ø 500 mm and is equipped with a powerful 44 (32) kW turning spindle as well as a powerful 20 kW milling unit with 20,000 rpm. Moreover, the machine can be equipped with a monitoring system for the motor spindle that records temperature and vibration values and forwards collected data to external systems if required.
„Smart machining“ is at the heart of the technological innovations at WFL, which ensure triumph in the MILLTURN arena thanks to gear skiving, B-axis turning or non-circular turning. The range of applications covered by the M20 is almost infinite, capable of carrying out demanding and complex machining tasks found in the aviation, automotive, engineering and plastics industries. Thanks to its excellent flexibility, the machine is also ideally suited for contract manufacturers.
A particular highlight is the innovative design of the machine. The M20 MILLTURN is characterized by straight-lined forms, minimalist design and optimum ergonomics. The doors and windows are made of glass and feature an integrated display of performance data as well as an integrated access to the tool magazine. The MILLTURN hero’s fresh appearance is further supported by its bright coloring. A convenient and user-friendly operation round off the unique design.
Variety of Technologies
Turning, Boring, Milling, Inprocess measuring, Turn-milling, 5-axis milling, B-axis turning, Shaping of external gear teeth (Flanx-Spline), Milling of external gear teeth (Flanx-LM), Special tool heads, Deep hole drilling, Milling of external gear teeth (Flanx-Invo), Gear Skiving, Hobbing of gear teeth (Flanx-Hob), Cam milling, Milling of crankshaft pins, Internal turning
Integrated workpiece handling – Features of the intCELL::
Shaft parts
- Diameter: max. 100 mm
- Length for double change process (individual change process): max. 300 (800) mm
- Weight for double change process (individual change process): 15 (30) kg
Chuck parts
- Diameter: max. 300 mm
- Length: max. 150 mm
- Weight: max. 15 kg
SMART, because
- WFL has decades of expertise in complete machining
- Manifold machining technologies
- Production cell with integrated loading and unloading without high gantry
- Individual tool holder at the bottom
- Very small gaps in the lower slide systems, as there are no telescopic plates
- Powerful motor spindle
- Extensive sensor technology
- Two B-axis systems in one machine for simultaneous B-axis turning
- Integrated workpiece handling
- 24“ multitouch screen (1920x1080 px)
- Operator panel with lean and modern design
Automated loading and unloading
- Integrated production cell
- Articulated robot
- Gantry loader
- Bar feeder